Rotator KM 04 with shaft or flange, 4500 kg
The HIAB KM 04 is a rotator with a shaft or flange and a load capacity of up to 4500 kg, with a gear drive and an oil flow through the rotator of 75 l/min.
The HIAB KM 04 is a rotator with a shaft or flange, with a load capacity of up to 4500 kg. It is mounted between the crane tip and the attachment – a grab, bucket or other tool – and allows it to be rotated, for precise load positioning. It is often supplied in sets with HIAB grabs and buckets.
It is available in eight versions: with a 4 x 140 mm flange or a shaft with a diameter of 59 to 69 mm. It has a gear drive with a torque of 850 to 1000 Nm, and an oil flow of 75 l/min can be routed through the rotator to the attachment. It can also be ordered with a short or long link, or with a KM 511 swing damper.
The table below shows all sizes with dimensions and weight. Send an inquiry and we will help you choose the version that suits your vehicle and outriggers.
- Load capacity up to 4500 kg
- 4 x 140 mm flange or Ø 59–69 mm shaft
- Gear drive, torque from 850 to 1000 Nm
- Oil flow through the rotator 75 l/min
- Weight from 26 to 31 kg
| Technical specifications | Value |
|---|---|
| Load capacity (kg) | 4500 |
| Connection | flange / shaft |
| Connection size | 4 x 140 mm / Ø 59 mm / Ø 62 mm / Ø 63 mm / Ø 68 mm / Ø 69 mm |
| Drive | gear |
| Torque (Nm) | 850 – 1000 |
| Oil flow through the rotator (l/min) | 75 |
| Height (mm) | 256 – 323 |
| Width (mm) | 173 |
| Weight (kg) | 26 – 31 |
| Number of versions | 8 |
| Available versions | KM04 – F, KM04 – F140-30US, KM04 – F140-30V, KM04 – S59, KM04 – S62, KM04 – S63, KM04 – S68, KM04 – S69 |
Detailed technical specifications for each version are available on request.
