The tipper valve controls the raising and lowering of the tipper body and limits the system pressure to the set value. The 504/017 type works at 240 bar and is actuated manually, via the handwheel on the valve.

If the tipper body does not lift a full load, the cause is often a drop in the valve's set pressure, not a weak pump. The setting is checked with a pressure gauge at the M10x1 test port.

Features and application

• Set pressure 240 bar
• M22x1.5 ports, M10x1 test port
• Manual actuation of the tipper valve and changeover valve
• Steel housing

Technical data

• Set pressure (bar): 240
• Port 1: M22x1.5
• Port 2: M22x1.5
• Port 3: M22x1.5
• Port 4: M22x1.5
• Port 5: M10x1
• Consumer port 1: M 22×1.5 internal thread
• Consumer port 2: M 22×1.5 internal thread
• Block valve control line port: none

Source: Meiller catalog, catalog number 504/017.

Why Tehnika Hidraulike?

As a regional service center and long-standing partner of leading world manufacturers of hydraulic truck-mounted equipment, with every part we also offer the advice of experts who work on this kind of equipment every day.

📞 Tell us the designation of the existing valve and the working pressure of the truck body.